Arrow

SDE

Office buildings

2009

Arrow iconProject overview

Address : 110 rue Ambroise Croizat
93000 Saint Denis
France
Contact person : Antonin Cornu-Langy
antonin.cornu-langy@wicona.com
- France

Architect : Richez Associés - Madame Florence Rapoport - florence.rapoport@richezassocies.com - 2 rue de la Roquette - 75011 - Paris - France - http://www.richezassocies.com/

Metal Builder : Leuillet Père et Fils SAS - fleuillet@wanadoo.fr - ZA Belleplace - 36400 - La Châtre - France

Other planning committee : SCI Canal St Denis - Maitre d'Ouvrage - ygantes@foncierearizona.com - 4 rue des Colonnes - 75002 - Paris - France

Project details : On the ground floor, WICTEC 50 grid effect curtain wall with pressure plate caping beaded structural glazing aspect, WICLINE 50E bottom hung frames and WICSTYLE 50E doors.

Arrow iconTechnical details

Facade systems

WICTEC 50

Filigree look without any change in appearance to the inner mullion and transom gaskets Ideal for vertical and polygon façades, sloped glazing and spatial structures Individual design thanks to a wide range of profile geometries for the structural and glazing profiles Uf for standard version up to 1.2W/m²K infill thickness 3 - 51mm Reliable glass load transmission (up to 4 kN), with adapted transom-joint technology Overlapping and secure drainage at the cross point, without mechanical mullion processing, ensures tried-and-tested impermeability Broad selection of profiles enables economic adaptation to structural requirements, with the additional option of internal reinforcement Glazing from outside featuring single- and/or two-part pressure and cover profiles Design options with concealed or visible screw fixture Extensive solutions for structure junctions and conservatories appearance similar to structural sealant glazing (SSG) facade Substitute silicon joint of SSG facades, no bonding and thus no SSG approval necessary Integrated pressure profile, available flat on or flush with the glass Elevation width 43 or 51mm
Built:: - Integrated pressure plate - Fixed glazing - Tilt
Window systems

WICLINE 50E

Thermally broken window system with 50mm profile depth for useage inside of buildings Standard sash with overlap Standard fittings Top mounted or inlet gear Time-saving assembly thanks to straightforward corner connection, pre-mounted fitting components and user-oriented systems technology
Built:: - Special construction - Concealed sash - Open inwards - Single leaf - Turn